壓槽滾筒設備在食品行業傍邊運用廣泛,首要是依托電動機的股動皮帶的的作業進行運送物料.流水線設備可以進行因地制宜的進行選用直線、彎道、斜坡等線體方法.壓槽滾筒設備有著運送間隔遠,結構簡略易于維護,可以十分便利的實行程序化和主動操作,運用運送帶的連續或是間歇運動來運送100KG以下的物品或是粉狀、顆粒物品有著作業高速、噪音低,而且可以進行上運送物料.皮帶是壓槽滾筒設備的首要承載物料部件,在經過長時間的作業壓槽滾筒設備也需求恰當的維護和維護,特別在壓槽滾筒設備休憩時的存儲也是至關的主要.
Grooving roller equipment is widely used in the food industry. The first thing is to rely on the operation of the motor's moving belt to transport materials. The assembly line equipment can be adapted to local conditions to select straight lines, curves, slopes and other line methods. Grooving roller equipment has The transportation interval is long, the structure is simple and easy to maintain, and it can be programmed and actively operated very conveniently. The continuous or intermittent movement of the conveyor belt is used to transport items under 100KG or powdery and granular items with high speed and low noise. The material can be transported on the belt. The belt is the primary material-carrying component of the grooved roller equipment. After a long period of operation, the grooved roller equipment also needs proper maintenance and maintenance, especially when the grooved roller equipment is resting. The storage is also crucial main.
壓槽滾筒設備在經過長時間運送皮帶想要得到較好的維護有必要遵從如下幾點:首要壓槽滾筒設備配件的皮帶和帶輪應當要進行堅持潔凈不得沾有油和水.皮帶進行設備時,應當檢查下傳動系統,傳動軸與傳動輪是不是垂直,傳動軸之間仍是不是平行,傳動輪是不是在一平面上,假設不是還需求進行校正.防止發生壓槽滾筒設備在進行作業時,出現跑偏表象.壓槽滾筒設備由于可以運送多種物料,如有油脂的物料切無粘到皮帶上.皮帶設備時東西或是外力切勿直接施于皮帶上.其他壓槽滾筒設備在運送物料時,皮帶的運用溫度規劃為負四十度至一百二十度,超越此規劃對皮帶危害大.
The grooved roller equipment needs to be well maintained after a long period of time to transport the belt. It is necessary to comply with the following points: The belts and pulleys of the main grooved roller equipment accessories should be kept clean and free from oil and water. At the time, check the transmission system, whether the transmission shaft and the transmission wheel are perpendicular, whether the transmission shafts are still parallel, whether the transmission wheel is on a flat surface, and it is assumed that correction is not required. To prevent the occurrence of grooved roller equipment During operation, there is the appearance of deviation. The grooved roller equipment can transport a variety of materials, such as greased materials without sticking to the belt. Do not apply anything or external force directly to the belt during the belt equipment. Other grooved rollers When the equipment is transporting materials, the operating temperature of the belt is planned to be minus 40 degrees to 120 degrees.Exceeding this plan is very harmful to the belt.
皮帶的貯存也是許多出產廠家所擔憂的疑問,貯存不當就得為壓槽滾筒設備更換新皮帶一來增加運送設備的出產本錢,二來需求進行舊新的更換及空車運載調試運送直接影響著出產公司的運送功率,所以皮帶的貯存也是許多出產公司所關心的主要疑問,作為壓槽滾筒設備的專業出產廠家就為咱們介紹下壓槽滾筒設備的皮帶貯存方法.
The storage of belts is also a question that many manufacturers worry about. Improper storage requires replacement of new belts for the grooved roller equipment. One is to increase the production cost of the transportation equipment. Second, the need to replace the old and the new and the empty vehicle transportation debugging directly affects the transportation. The transportation power of the production company, so the storage of the belt is also the main concern of many production companies.As a professional manufacturer of grooved roller equipment, we will introduce the belt storage method of the lower grooved roller equipment.
皮帶在進行貯存和運送物料期間,必定是經過了一段時間的物料運送,要進行盡量防止皮帶承受過大的分量而變形,防止機械危害,不得過于彎曲和揉捏.皮帶在貯存期間還應防止陽光直射或是雨雪浸淋,堅持清洗,防止與酸堿油類有機溶劑等影響橡膠質量的物質觸摸.貯存時倉庫溫度堅持在負十五度至四十度之間,相對濕度堅持在百分之五十至百分之八十之間.
During the storage and transportation of materials, the belt must be transported for a period of time. It is necessary to prevent the belt from being deformed due to excessive weight, prevent mechanical hazards, and not be too bent and kneaded. The belt should also be prevented during storage. Direct sunlight or immersion in rain and snow, insist on cleaning to prevent contact with substances that affect the quality of rubber such as acid, alkali, oil and organic solvents. During storage, the warehouse temperature is maintained at minus 15 to 40 degrees, and the relative humidity is maintained at 100 Between 50% and 80%.
以上內容由溫嶺市華宇生產流水線制造廠整理提供。華宇生產流水線是一家專業生產、設計、安裝、調試、運輸、維護為一體的流水線設備企業。建廠26年來，憑著先進的現代化生產管理體系，產品不斷創新，制造出成套懸掛物件輸送線，各類皮帶式輸送線、涂裝線、板鏈線、整機線、清洗線、自動化組合裝配生產設備，倉儲等產品系列。產品廣泛應用于汽車、摩托車、電動自行車及配件、清洗機、汽油機、縫糿機、電機、儀器儀表、家用電器、電腦、彩電、空調器、電冰箱、洗衣機、炊具、節能機、化妝品、通信、交通、水泵、食品塑料制品等電子行業各種裝配生產,為企業生產提高效率，降低人力成本。熱忱歡迎新老客戶來廠參觀、洽談合作！
The above content is organized and provided by Wenling Huayu Production Line Manufacturing Plant. Huayu production line is a professional production, design, installation, commissioning, transportation and maintenance line equipment enterprise. Since the establishment of the factory 26 years ago, with the advanced modern production management system and continuous product innovation, a complete set of suspended object conveyor lines, various belt conveyor lines, coating lines, plate chain lines, complete machine lines, cleaning lines, and automated combinations have been manufactured Assemble production equipment, storage and other product series. Products are widely used in automobiles, motorcycles, electric bicycles and accessories, washing machines, gasoline engines, sewing machines, motors, instruments, household appliances, computers, color TVs, air conditioners, refrigerators, washing machines, cooking utensils, energy-saving machines, cosmetics, Various assembly and production of electronic industries such as communications, transportation, water pumps, food plastic products, etc., improve production efficiency and reduce labor costs for enterprises. Warmly welcome new and old customers to visit the factory and discuss cooperation!
